SEFIS MS10 Suzuki handguards

Click here for Gallery.

SEFIS MS10 Suzuki handguards

Compatible with original Suzuki handlebars

The SEFIS MS10 handguards are ingeniously designed to fit most Suzuki motorcycles thanks to a unique mounting method. On the inside it’s a handlebar sleeve with a diameter of 22 and 28.6 millimeters made out of durable nylon, and on the outside it’s a handlebar mount designed directly for original Suzuki handlebars with M6 thread.

Variable adjustable mounting kit

Because of the cleverly designed mounting kit with a sleeve, the installation of handguards is easy. The three joints of the mount easily grip the handlebars wherever needed, regardless of their shape, and the mount can be rotated and guided either from the bottom or the top, which is especially useful for easily avoiding cabling and other possible accessories on the handlebars.

Compatible with other SEFIS products

The MS10 handguards are compatible with a wide range of SEFIS handlebar mounted products. You can easily install them even if you use any of the Cafe racer mirrors or our Mechanical cruise control. And the combination with extra heavy SEFIS Lead weights is ideal for long, significantly curved handlebars with a tendency to vibrate. If you are not sure whether the protectors are compatible with SEFIS accessories you are currently using or planning to purchase, do not hesitate to write or call us, we will be happy to advise you.

Sophisticated design for maximum hand protection

Handguards, blasters or basters are a very practical way to protect your hands from the wind and bad weather. Especially in colder weather everyone could easily appreciate them, as will surely be confirmed by anyone who has already experienced a ride with frozen fingers first-hand. The MS10 handguards are large enough and have an ideal shape, so they not only look good, but also very effectively protect against wind and rain. Another advantage is the protection from insects and pebbles, which can be dangerous, especially at higher speeds. Fans of off-road riding will also appreciate the protection of their hands from branches and bushes.

Flexible and strong body material

The lever protector has to withstand some impact and deformation, so cracking is one of the main disadvantages of cheap lever protectors. For the body of MS10 protectors we used extra durable and above all flexible plastic. The picture shows the handguard body, which we bent by 90 degrees. On release there was no damage and the protector immediately straightened back to its original position without signs of deformation. We also chose the best for the materials for the other parts. The mounting kit around the handlebar is made of milled nylon which excels in its toughness and the handlebar end kit is made of a light and strong aluminum alloy.

Additional optional extension

The package also includes a practical extension of the handguards which further improves their protective properties. No tools are required for installation, as the included pins are used. The short pins are plugs for use without the extension, while the long pins serve to afix the extension to the body of the handguard. Installing or uninstalling the extension is a matter of a few seconds and will allow you to choose which style best suits your motorcycle.

Mount for most Suzuki handlebars

This set of MS10 handguards is made for original Suzuki handlebars with M6 thread. Installation is very easy. Remove the original bar end weights and then screw on the MS10 tightening them with allen key as needed. Correctly installed handguards should hold firmly without any movement.

Ask a question about SEFIS MS10 Suzuki handguards

Your Name

Your Email:

Question:

Note: HTML is not translated!

SEFIS MS10 Suzuki handguards

compatible with original Suzuki handlebars with M6 thread
easy installation with variably adjustable mounting kit
the mounting bracket has several positions and can be guided up and down around the cabling
the sleeve is designed for handlebars with a diameter of 22m and 28.6mm
optional additional extender with short and long plastic pins, short pins are used without the extender, long pins are used to install the exteder
sophisticated design for maximum protection of hands from wind, rain, stones, branches, etc.
compatible with SEFIS products: cafe racer mirrors, mechanical cruise control, lead weights and more
the body of the protectors is made of flexible plastic, it does not crack when deformed, it returns to its original shape
handlebar sleeve made of durable nylon
handlebar mount made of aluminum
dimensions: see picture
package contains: 2x handguard body, 2x mount with sleeve, 2x Suzuki handlebar mount M6, 2x plexiglass extender, 4x short pin, 4x long pin
the price is for 1 pair

Availability: 5 and more
Delivery Status: Depens on courier (Immediately at the store in Prague)
51.60 €
Ex Tax: 42.64 €