SEFIS Flow Duo LED turn lights - front pair
![]() |
✓ E-MARKED ✓ WATER RESISTANT IP67 ✓ FLEXIBLE RUBBER LEG ✓ HIGH QUALITY |
✓ SMALL SIZE ✓ HIGH VISIBILITY ✓ SEQUENTIAL LIGHTING ✓ ADDITIONAL DAYLIGHT ✓ LED TECHNOLOGY |
![]() |
![]() |
✓ GOOD LOOKING ✓ MODERN DESIGN ✓ DRAWS ATTENTION ✓ UNIVERSAL |
File | Description | Size | Link |
---|---|---|---|
Turn lights manual CZ | How to buy turn lights? (czech instruction) | (1.41MB) | Download |
- e-marked
- waterproof - IP67
- sequential – Audi like style
- two rows of LED lights, top row functioning as day light, bottom row used as sequential turn light
- warning! Day light is only meant as additional light and doesn’t replace necessary legal motorcycle lighting
- clear glass for best visibility
- LED technology
- dimensions on the photo
- material: body: ABS plastic, leg: resistant rubber, thread M8: metal
- color: body: black, plastic glass: clear
- the price is for 1 pair ( left and right )
SEFIS Flow Duo LED turn lights - front pair
Not sure when buying advice? Down below you will find instructions DOWNLOAD
- Availability: 5 and more
- Delivery Status: Depens on courier (Immediately at the store in Prague)
- 39.10 €
- Ex Tax: 32.33 €
Tags: SEFIS Flow Duo LED turn lights - front pair, SM-036158,
Cable connector 30cm 2pcs
In Stock
The harness connector is used to easily connect to any wiring on the bike without having to cut or cut the original wiring. It is suitable for all common wires with a diameter of 1.5 - 2 mm and is used, for example, when installing blinkers, additional lights, alarms, etc. to "stab" into the original electrical wiring of the motorcycle. If you remove the punch-through connector again, we recommend re-insulating the cable in the place where the punch-through connector was connected, for example with electrician's insulating tape.<br /> <br /> <br /> How to use: <ol> <li>Unscrew the gray cover of the piercing terminal.</li> <li>Insert the cable to which you want to connect the connector into the groove in the gray cover of the piercing terminal. The connector is suitable for use with ordinary cables with a diameter of 1.5 – 2 mm.</li> <li>Screw the red punch-through end with the extension cable onto the gray cover of the punch-through terminal with the cable and make sure that the connected cable is firmly fixed.</li> </ol>
2.60 € Ex Tax: 2.15 €
SEFIS thread adhesive locker glue - medium strength
In Stock
<strong>Instructions for use - </strong>Apply to the thread and immediately tighten. The glue will fully harden within 24 hours.
1.60 € Ex Tax: 1.29 €
SEFIS Faston socket - round connector 4mm with insulation - female - 10 pcs
In Stock
2.00 € Ex Tax: 1.62 €
SEFIS set Faston - round connector 4mm with insulation - male and female - 10 pcs
In Stock
3.20 € Ex Tax: 2.61 €
SEFIS Basic LED turn light
In Stock
✓ E-MARKED ✓ WATER RESISTANT IP67 ✓ FLEXIBLE RUBBER LEG ✓ HI..
10.00 € Ex Tax: 8.23 €
SEFIS Flow Duo LED turn lights - front pair
In Stock
✓ E-MARKED ✓ WATER RESISTANT IP67 ✓ FLEXIBLE RUBBER LEG ✓ HI..
39.10 € Ex Tax: 32.33 €
SEFIS Flow Duo LED turn lights - rear pair
In Stock
✓ E-MARKED ✓ WATER RESISTANT IP67 ✓ FLEXIBLE RUBBER LEG ✓ HI..
39.10 € Ex Tax: 32.33 €
In Stock
In Stock
In Stock
Ex Tax:577.69
In Stock
In Stock