SEFIS MS10 Honda NC750X handguards
SEFIS MS10 Honda NC750X handguards
Compatible with original Honda handlebars
The SEFIS MS10 handguards are ingeniously designed to fit most Honda motorcycles thanks to a unique mounting method. On the inside it’s a handlebar sleeve with a diameter of 22 and 28.6 millimeters made out of durable nylon, and on the outside it’s a handlebar mount designed directly for original Honda handlebars with an inner diameter of 18.6mm.
Variable adjustable mounting kit
Because of the cleverly designed mounting kit with a sleeve, the installation of handguards is easy. The three joints of the mount easily grip the handlebars wherever needed, regardless of their shape, and the mount can be rotated and guided either from the bottom or the top, which is especially useful for easily avoiding cabling and other possible accessories on the handlebars.
Compatible with other SEFIS products
The MS10 handguards are compatible with a wide range of SEFIS handlebar mounted products. You can easily install them even if you use any of the Cafe racer mirrors or our Mechanical cruise control. And the combination with extra heavy SEFIS Lead weights is ideal for long, significantly curved handlebars with a tendency to vibrate. If you are not sure whether the protectors are compatible with SEFIS accessories you are currently using or planning to purchase, do not hesitate to write or call us, we will be happy to advise you.
Sophisticated design for maximum hand protection
Handguards, blasters or basters are a very practical way to protect your hands from the wind and bad weather. Especially in colder weather everyone could easily appreciate them, as will surely be confirmed by anyone who has already experienced a ride with frozen fingers first-hand. The MS10 handguards are large enough and have an ideal shape, so they not only look good, but also very effectively protect against wind and rain. Another advantage is the protection from insects and pebbles, which can be dangerous, especially at higher speeds. Fans of off-road riding will also appreciate the protection of their hands from branches and bushes.
Flexible and strong body material
The lever protector has to withstand some impact and deformation, so cracking is one of the main disadvantages of cheap lever protectors. For the body of MS10 protectors we used extra durable and above all flexible plastic. The picture shows the handguard body, which we bent by 90 degrees. On release there was no damage and the protector immediately straightened back to its original position without signs of deformation. We also chose the best for the materials for the other parts. The mounting kit around the handlebar is made of milled nylon which excels in its toughness and the handlebar end kit is made of a light and strong aluminum alloy.
Additional optional extension
The package also includes a practical extension of the handguards which further improves their protective properties. No tools are required for installation, as the included pins are used. The short pins are plugs for use without the extension, while the long pins serve to afix the extension to the body of the handguard. Installing or uninstalling the extension is a matter of a few seconds and will allow you to choose which style best suits your motorcycle.
Mount for Honda handlebars
This set of MS10 handguards is made for original Honda handlebars with inner diameter of 18,6 milimeters. Installation is very easy. Put expanding adapter onto the screw and then attach the conical nut and lightly tighten it by hand. Once assembled insert into the handlebars and then tighten the screw using allen key. Correctly installed handguards should hold firmly without any movement.
- compatible with original Honda handlebars with an inner diameter of 18.6mm – need to uninstall the original assembly
- easy installation with variably adjustable mounting kit
- the mounting bracket has several positions and can be guided up and down around the cabling
- the sleeve is designed for handlebars with a diameter of 22m and 28.6mm
- optional additional extender with short and long plastic pins, short pins are used without the extender, long pins are used to install the exteder
- sophisticated design for maximum protection of hands from wind, rain, stones, branches, etc.
- compatible with SEFIS products: cafe racer mirrors, mechanical cruise control, lead weights and more
- the body of the protectors is made of flexible plastic, it does not crack when deformed, it returns to its original shape
- handlebar sleeve made of durable nylon
- handlebar mount made of aluminum
- dimensions: see picture
- package contains: 2x handguard body, 2x mount with sleeve, 2x Honda handlebar mount 18,6mm, 2x plexiglass extender, 4x short pin, 4x long pin
- the price is for 1 pair
SEFIS MS10 Honda NC750X handguards
- Availability: 5 and more
- Delivery Status: Depens on courier (Immediately at the store in Prague)
- 57.90 €
- Ex Tax: 47.86 €
Tags: SEFIS MS10 Honda NC750X handguards, MS-189595,