SEFIS Set Bind + Bind Charge phone holder with wireless charger and USB-C socket
SEFIS Set Bind + Bind Charge
durable phone holder with anti-shock adapter and 15W wireless charging module
Quick and easy to use
Unlike mobile phone holders where the phone needs to be secured with a wheel or hand screw, the Bind holder uses a more modern system with the upper claw on a strong spring which means inserting and removing the phone takes only a few seconds. The grip on the phone is firm and safe also thanks to the fact that the phone is secured by grips on all sides and there is no risk of it falling out even during off-road rides.
Variable setup directly for your phone
The side claws of the holder can be moved and allow one-time adjustment to the exact width of your phone, from small phones with a width of only 63 millimeters to large ones with a width of up to 88 millimeters.
Setup is simple and requires nothing more than a standard Phillips screwdriver. In height, the holder can hold phones with a length of 128 to 193 millimeters, and even thick outdoor phones are not a problem, the massive claws can hold a phone up to 20 millimeters thick.
The fastest 15W charging Qualcomm Quick Charge 3.0
The Bind Charge charging module uses the latest Qualcomm Quick Charge 3.0 technology. This makes it work with all mobile phones that support Qi 15W fast wireless charging, as well as older phones that support Qi 10W, 7.5W and 5W technology. In the manual for your phone, you will find all the necessary information about which charging technology it uses.
At full power, Bind Charge can charge a phone with a normal battery capacity in just 35 minutes up to 80% battery capacity, and you can finally stop worrying that your phone won't have time to charge while driving with navigation.
USB-C 36W socket
However, you can use the charging module even if you are only planning a phone with wireless charging. In addition to wireless charging, the body of the charger also has an integrated high-performance USB-C socket to which you just need to connect a USB-C cable with an end for your phone and enjoy fast charging. You can use it even if you charge your phone wirelessly, the socket can then be used to charge another USB device on the handlebars, such as our wireless pressure gauges or to charge the intercom while driving.
Sophisticated anti-theft lock
The leg of the Bind holder is equipped with a very sophisticated anti-theft device. After tightening with an Allen key, it is still possible to comfortably loosen the leg with a large hand screw and adjust the angle or rotation of the phone in the holder at any time within a few seconds, even while wearing gloves. However, the hand screw will not allow the leg to loosen more so that the holder can be completely removed from the handlebars, so if a random thief does not have pockets full of Allen keys, he will probably leave empty handed.
Integrated anti-shock adapter
It's known that cameras of expensive mobile phones can be quite susceptible to exposure to vibrations, and in general, any vibrations or shocks can damage expensive electronics, especially over long period of time. With modern phone holders, we already have a solution in the form of an anti-shock adapter, which noticeably dampens any unwanted vibrations. To ease installation the anti-shock adapter is already integrated directly into the body of the holder.
File | Description | Size | Link |
---|---|---|---|
Bind Charge - Charging module instructions CZ | CZ manual 2023 | (1MB) | Download |
Bind Charge - Charging module instructions EN | EN manual 2023 | (1.06MB) | Download |
Bind - phone holder - instructions CZ | CZ manual 2023 | (622.56KB) | Download |
Bind - phone holder - instructions EN | EN manual 2023 | (645.32KB) | Download |
- securely holds the phone even off-road
- the integrated anti-shock adapter absorbs most of the vibrations from the motorcycle
- durable lightweight body made of durable plastic with a rubber insert
- mounting on a handlebar or frame with a diameter of 22mm and 25mm
- suitable for motorcycle, bicycle, scooter, quad bike, etc.
- easy insertion and removal thanks to the rigid spring system
- inserting and removing the phone in a few seconds
- 360-degree rotation, tilting the phone up, down and sideways
- for phones with a width of min 63 max 88 mm, height min 128 max 193 mm and thickness max 20 mm
- fast 15W wireless charging Qualcomm Quick Charge 3.0
- compatible with phones supporting QI wireless charging 15W / 10W / 7.5W / 5W
- USB-C socket 36W, 5V/3.5A, 9V/3.5A, 12V/3A
- switch and information diode directly on the body of the charger
- long detachable cable to connect to the battery
- IP 66 water and dust resistance
- charging power 12-24V
- CE, FC, RoHS charger certification
- anti-theft protection with the ability to quickly adjust the tilt and rotation of the phone
- material: plastic, rubber, silicone, metal
- black colour
- CZ and EN instructions in the download tab
- Package Contents: Phone Holder Body with Anti-Shock Adapter, Handlebar Mount, Anti-Theft Leg, Allen Wrench, Charger Body, Clip for Connecting to the Holder Leg, Wireless Charging Pad, Cable for Connecting to Battery, 2x Tie Down Tape
SEFIS Set Bind + Bind Charge phone holder with wireless charger and USB-C socket
- Availability: 5 and more
- Delivery Status: Depens on courier (Immediately at the store in Prague)
- 70.80 €
- Ex Tax: 58.51 €
Tags: SEFIS Set Bind + Bind Charge phone holder with wireless charger and USB-C socket, SM-050505,