UNPASS OUT cleaner and care helmet
Click here for Gallery.
Package contains:
IN: HELMET INTERIOR CLEANER 100ml
Cleans-Disinfects-Refreshes
IN is the perfect solution for cleaning, disinfecting and eliminating the unpleasant odors of the helmet interior. Suitable for all types of helmets. IN can also be used on the inside of shoes, gloves, overalls, jackets and trousers.
IN cleans and neutralizes odors with immediate results.
IN removes dirt accumulated in the helmet caused by sweat and dirt.
IN accelerates the removal of moisture and sweat thanks to the drying effect.
IN dries quickly and allows you to reuse the helmet within 20 minutes of cleaning.
HOW TO APPLY:
Shake the bottle.
Spray lightly on the inside of the helmet to cover the entire surface.
Leave for 30 to 45 seconds.
Wipe clean with a clean cloth or paper towel.
Allow to dry for a few minutes.
TIPS:
Use in well ventilated areas.
Do not use the helmet until the interior is completely dry.
Do not use on hot surfaces.
Deep cleans
Neutralizes unpleasant odors
It dries quickly
Packaging: 100 ml
OUT: HELMET CLEANER AND PROTECTION 100ml
Cleans-Protects-Restores
OUT is designed for optimal cleaning of the outside of the helmet. Its unique composition allows you to thoroughly clean and safely restore the look of your helmet. It will look like new. Suitable for all types of helmets - matt and glossy.
OUT restores the original appearance of the shell and reduces the visual impact of micro scratches. It leaves a water-repellent protective film on the surface. OUT also very effectively cleans the visor and goggles.
HOW TO APPLY:
To avoid the risk of scratches, first rinse excess or coarse dirt off the surface - for example, after driving off-road.
Spray evenly on the surface.
Allow the product to act (15 to 20 seconds).
Spread with a soft cloth (not a paper towel !!) with a slight circular motion.
Use a microfiber cloth to polish the surface and wipe dry.
TIPS:
Do not use on hot surfaces and do not apply in direct sunlight.
In the event of a large amount of soiling, repeat the procedure.
Restores the look of the helmet
Leaves protective film
For all types of helmets
Designed for matt and glossy surfaces
Packaging: 100 ml
VF: ANTI-MIS PREPARATION 30ml
VF is an anti-fog treatment designed specifically for the interior of the visor and goggles.
VF creates a transparent film inside the visor and glasses to prevent fogging. The visor will no longer fog up, making your ride safer, especially in cold and humid weather.
HOW TO APPLY:
Make sure the surface is clean and dry.
Spray evenly onto the surface (2 to 3 ml is sufficient)
Allow the product to act (15 to 20 seconds).
Use a soft, lightly absorbent cloth (preferably the cloth supplied in the kit) to slowly spread the product in a light circular motion.
Gently polish the surface and wipe dry.
TIPS:
Do not apply on hot surfaces or in direct sunlight.
In case of very dirty surface (fingerprints, dirty foil, etc.) we recommend to clean the preliminary surface with our OUT product (supplied in the set).
For long-term results, apply VF twice without touching the inside of the visor.
Packaging: 30 ml
VR: WATER DISPENSER 30ml
The VR Rainwater Repellent is specially designed for the outer surface of visors and goggles.
VR creates a water-repellent film, water from the visor runs down, does not stick, which improves visibility.
VR converts water droplets into microbeads that run down the sight quickly, ensuring excellent visibility even in the rain.
The VR effect is exceptional at speeds of approximately 50 km / h and above.
HOW TO APPLY:
Make sure the visor surface is clean and dry.
Spray evenly on the surface (3 to 4 ml is sufficient).
Let the product act (10 to 15 seconds).
Use a soft, lightly absorbent cloth (preferably the cloth supplied in the kit) to slowly spread the product in a light circular motion.
Gently polish the surface and wipe dry.
TIPS:
Do not apply on hot surfaces or in direct sunlight.
Make sure the visor is clean, free from insects, asphalt, dirt, etc.
We recommend that you first clean the surface with our OUT product (included in the kit).
Improves visibility
Long-lasting protection
Packaging: 30 ml
IN: HELMET INTERIOR CLEANER 100ml
Cleans-Disinfects-Refreshes
IN is the perfect solution for cleaning, disinfecting and eliminating the unpleasant odors of the helmet interior. Suitable for all types of helmets. IN can also be used on the inside of shoes, gloves, overalls, jackets and trousers.
IN cleans and neutralizes odors with immediate results.
IN removes dirt accumulated in the helmet caused by sweat and dirt.
IN accelerates the removal of moisture and sweat thanks to the drying effect.
IN dries quickly and allows you to reuse the helmet within 20 minutes of cleaning.
HOW TO APPLY:
Shake the bottle.
Spray lightly on the inside of the helmet to cover the entire surface.
Leave for 30 to 45 seconds.
Wipe clean with a clean cloth or paper towel.
Allow to dry for a few minutes.
TIPS:
Use in well ventilated areas.
Do not use the helmet until the interior is completely dry.
Do not use on hot surfaces.
Deep cleans
Neutralizes unpleasant odors
It dries quickly
Packaging: 100 ml
OUT: HELMET CLEANER AND PROTECTION 100ml
Cleans-Protects-Restores
OUT is designed for optimal cleaning of the outside of the helmet. Its unique composition allows you to thoroughly clean and safely restore the look of your helmet. It will look like new. Suitable for all types of helmets - matt and glossy.
OUT restores the original appearance of the shell and reduces the visual impact of micro scratches. It leaves a water-repellent protective film on the surface. OUT also very effectively cleans the visor and goggles.
HOW TO APPLY:
To avoid the risk of scratches, first rinse excess or coarse dirt off the surface - for example, after driving off-road.
Spray evenly on the surface.
Allow the product to act (15 to 20 seconds).
Spread with a soft cloth (not a paper towel !!) with a slight circular motion.
Use a microfiber cloth to polish the surface and wipe dry.
TIPS:
Do not use on hot surfaces and do not apply in direct sunlight.
In the event of a large amount of soiling, repeat the procedure.
Restores the look of the helmet
Leaves protective film
For all types of helmets
Designed for matt and glossy surfaces
Packaging: 100 ml
VF: ANTI-MIS PREPARATION 30ml
VF is an anti-fog treatment designed specifically for the interior of the visor and goggles.
VF creates a transparent film inside the visor and glasses to prevent fogging. The visor will no longer fog up, making your ride safer, especially in cold and humid weather.
HOW TO APPLY:
Make sure the surface is clean and dry.
Spray evenly onto the surface (2 to 3 ml is sufficient)
Allow the product to act (15 to 20 seconds).
Use a soft, lightly absorbent cloth (preferably the cloth supplied in the kit) to slowly spread the product in a light circular motion.
Gently polish the surface and wipe dry.
TIPS:
Do not apply on hot surfaces or in direct sunlight.
In case of very dirty surface (fingerprints, dirty foil, etc.) we recommend to clean the preliminary surface with our OUT product (supplied in the set).
For long-term results, apply VF twice without touching the inside of the visor.
Packaging: 30 ml
VR: WATER DISPENSER 30ml
The VR Rainwater Repellent is specially designed for the outer surface of visors and goggles.
VR creates a water-repellent film, water from the visor runs down, does not stick, which improves visibility.
VR converts water droplets into microbeads that run down the sight quickly, ensuring excellent visibility even in the rain.
The VR effect is exceptional at speeds of approximately 50 km / h and above.
HOW TO APPLY:
Make sure the visor surface is clean and dry.
Spray evenly on the surface (3 to 4 ml is sufficient).
Let the product act (10 to 15 seconds).
Use a soft, lightly absorbent cloth (preferably the cloth supplied in the kit) to slowly spread the product in a light circular motion.
Gently polish the surface and wipe dry.
TIPS:
Do not apply on hot surfaces or in direct sunlight.
Make sure the visor is clean, free from insects, asphalt, dirt, etc.
We recommend that you first clean the surface with our OUT product (included in the kit).
Improves visibility
Long-lasting protection
Packaging: 30 ml
- IN (100ml) helmet interior cleaner
- OUT (100 ml) cleaner and helmet protection
- VF (30 ml) anti-fog
- VR (30 ml) water repellent
CARE KIT FOR HELMETS - HELMET CLEANING AND CARE KIT
Set contains 4 products to ensure complete cleaning and professional care of the helmet:
Set contains 4 products to ensure complete cleaning and professional care of the helmet:
- Availability: 3
- Delivery Status: Depens on courier (Immediately at the store in Prague)
- 28.80 €
- Ex Tax: 23.76 €
Tags: UNPASS OUT cleaner and care helmet, UNPASS611,
Recommended Products
Related Products