SEFIS Grab durable ABS phone holder with anti-shock adapter for bikes or scooters
SEFIS Grab
durable ABS mobile phone holder with anti-shock adapter
The SEFIS Grab is a modern universal mobile phone holder. It is perfect not only for motorcycles, but also for scooters, bicycles, scooters or modern electric vehicles. It includes an integrated anti-shock adapter, and a handlebar mount and an under the mirror installation adapter. It is suitable for large and outdoor mobile phones, and it only takes a few seconds to insert and remove the phone.
Quick and easy to use
Unlike mobile phone holders where the phone needs to be secured with a wheel or hand screw, the Grab holder uses a more modern system with the upper claw on a strong spring which means inserting and removing the phone takes only a few seconds. The grip on the phone is firm and safe also thanks to the fact that the phone is secured by grips on all sides and there is no risk of it falling out even during off-road rides.
Variable setup directly for your phone
The side claws of the holder can be moved and allow one-time adjustment to the exact width of your phone, from small phones with a width of only 60 millimeters to large ones with a width of up to 90 millimeters.
Setup is simple and requires nothing more than a standard Phillips screwdriver. In height, the holder can hold phones with a length of 125 to 175 millimeters, and even thick outdoor phones are not a problem, the massive claws can hold a phone up to 18 millimeters thick.
Quality construction
The body of the Grab holder is made of durable ABS plastic, making it strong and light at the same time. On the inside, the holder is equipped with a thick rubber insert and a silicone coating on the grips, which will ensure a firm grip on the phone without risk of scratching. Of course, there is also a high-quality spring, which won't wear out over time and weaken the grip of the phone. We have been happily using our holders with this system for several years.
Integrated anti-shock adapter
It's known that cameras of expensive mobile phones can be quite susceptible to exposure to vibrations, and in general, any vibrations or shocks can damage expensive electronics, especially over long period of time. With modern phone holders, we already have a solution in the form of an anti-shock adapter, which noticeably dampens any unwanted vibrations. To ease installation the anti-shock adapter is already integrated directly into the body of the holder.
360° rotation
The variable mount allows you to adjust the position of the phone holder exactly as you need, the holder can be turned and angled in all directions and turned around with 360° rotation. In addition, to change the setting, all you have to do is loosen the hand screw on the body of the mount's. This is very easy even when wearing gloves, so it is not a problem to quickly loosen the mount and turn the holder if, for example, you prefer horizontal display of the navigation.
Installation on handlebars, frame or under the mirror
Thanks to the variable mount the Grab holder can be attached to handlebars or a frame with a diameter of 22 - 35 millimeters or directly under the mirror with the adapter included in the package. The installation itself is very simple, when installing on the handlebars, you just select one of the two sleeves according to the diameter of the handlebars and a plastic insert which prevents the handlebars from being scratched. All you need to do is to tighten the included nuts with a silicone insert which prevents loosening due to vibrations. Under the mirror, you only need to unscrew the mirror and insert an adapter with a hole of 10 millimeters, which should fit under all commonly used mirrors.
Do you prefer an atypical installation method or do you already have one of our older mounts installed? Although Grab holder has everything you need included, it is also fully compatible with the SEFIS Ball system and its huge selection of other attachments.
| File | Description | Size | Link |
|---|---|---|---|
| Grab - phone holder - instructions CZ | CZ manual 2023 | (1.04MB) | Download |
| Grab - phone holder - instructions EN | EN manual 2023 | (477.82KB) | Download |
| Grab - phone holder - instructions DE | DE manual 2023 | (489.43KB) | Download |
-17%
SEFIS UN10 2x USB charger / socket with moto battery status meter
<h3 style="text-align: center;"><strong></strong><strong><strong>SEFIS USB charger socket - UN10 for motorcycles, scooters, e-mobility vehicles</strong></strong></h3> <br /> <br /> <strong> </strong> <div style="text-align: center;"><strong>The UN10 charger is equipped with modern fast 15W charging for mobile phones with QC 3.0 support and is also compatible with older phones and other USB charging devices. It contains two USB sockets that allow you to charge two different devices at the same time and a switch that completely disconnects the charger from the battery and thus prevents it from being discharged unintentionally. The charger is water and dust resistant and equipped with a rubber cap that protects the USB ports and just flip it over, you don't have to worry about losing it. Installation of the charger itself is possible in several ways - with a socket directly on the handlebars, an adapter under the mirror or by screwing it directly anywhere on the surface. Thanks to the split cable, it is easier to stretch the cable through the body of the motorcycle to the charger and it is possible to disconnect the charger without having to disassemble the motorcycle.</strong></div> <strong> </strong> <div style="text-align:center"><img alt="" src="https://sefismoto.cz/image/produkty/Long/UN10/un10-bubbl-long-en-1.jpg" /> <img alt="" src="https://sefismoto.cz/image/produkty/Long/UN10/un10-bubbl-long-en-2.jpg" /></div>
25.00 € 20.80 € Ex Tax: 17.18 €
SEFIS adapter 25mm long leg 150mm
10.40 € Ex Tax: 8.57 €
SEFIS 2x USB socket - charger DIN HELLA
16.20 € Ex Tax: 13.40 €
SEFIS UN2 2x USB charger socket
<strong>Installation</strong>: Put the red (+) and black (–) wire loops on the corresponding connectors on the motorcycle battery. The white switching wire is used to connect to the already existing (+) wiring of the motorcycle, e.g. to the light wiring. This limits the function of the socket on the motorcycle that is started and thus prevents the battery from draining when the engine is not running. If you want to connect the socket in a standard way, without depending on the ignition, add a white wire to the eye of the red wire or connect it to the red wire<img alt="" src="https://sefismoto.cz/image/produkty/usb_kabely_nabijecky/usb-2-nabijecka-zasuvka-ms-un7-popisky-v2-long.jpg" /> <div> </div> <img alt="" src="https://sefismoto.cz/image/produkty/usb_kabely_nabijecky/usb-2-nabijecka-zasuvka-ms-un7-otevreno-zavreno-long.jpg" />
20.40 € Ex Tax: 16.87 €
SEFIS EW 2 phone holder with wireless charging and clamp
SEFIS EW 2 phone holder with wireless charging Do you enjoy complete freedom ..
57.90 € Ex Tax: 47.86 €
SEFIS NEO metal phone holder with 15W wireless charging
SEFIS NEO metal phone holder with 15W wireless charging The last mobile ..
82.90 € Ex Tax: 68.53 €
-62%
In Stock
Ex Tax:81.82
-34%
In Stock
In Stock
-43%
In Stock
Ex Tax:660.33
-19%
In Stock
Ex Tax:1073.55
On request