CTEK MXS 5.0 charger
Click here for Gallery.
MXS 5.0 is a fully automated model offering ease of use, high safety and flexibility, as it is suitable for all types of lead-acid batteries.
It is a universal charger for small and large batteries thanks to the motorcycle / car mode.
It can diagnose the condition of the battery and maximize its efficiency and life.
It is also suitable for mainterance charging. The regeneration function then prevents uneven electrolyte stratification, which would lead to loss of capacity and reduced service life.
In addition, you can clearly monitor all charging steps on the color display.
In the colder months, the built-in temperature compensation may be useful.
You don't have to worry about the safety of your battery or car. The charger provides protection against short circuits, overvoltages and polarity reversals, protects the vehicle's electrical system during charging and is also resistant to splashing water and dust (IP 65 certification).
Notice
To charge in Recond mode, it is necessary to disconnect the battery from the wiring and charge the battery outside the car. This is a mode in which controlled mixing of the electrolyte is performed and the charger charges the battery to a higher voltage than in other modes.
Recond mode cannot be used for batteries with Gel Electrolyte (AGM)
It is suitable for use only with deeply discharged batteries, where the electrolyte is layered (thickens at the bottom, thinens at the top). This mode should be used once or at most twice a year.
If it is not a maintenance-free battery and therefore has freely accessible caps, it is necessary to leave these caps open during charging.
Additional information:
All types of 12V lead-acid batteries (wet, MF, Ca / Ca, AGM and GEL)
5 year warranty.
It is a universal charger for small and large batteries thanks to the motorcycle / car mode.
It can diagnose the condition of the battery and maximize its efficiency and life.
It is also suitable for mainterance charging. The regeneration function then prevents uneven electrolyte stratification, which would lead to loss of capacity and reduced service life.
In addition, you can clearly monitor all charging steps on the color display.
In the colder months, the built-in temperature compensation may be useful.
You don't have to worry about the safety of your battery or car. The charger provides protection against short circuits, overvoltages and polarity reversals, protects the vehicle's electrical system during charging and is also resistant to splashing water and dust (IP 65 certification).
Notice
To charge in Recond mode, it is necessary to disconnect the battery from the wiring and charge the battery outside the car. This is a mode in which controlled mixing of the electrolyte is performed and the charger charges the battery to a higher voltage than in other modes.
Recond mode cannot be used for batteries with Gel Electrolyte (AGM)
It is suitable for use only with deeply discharged batteries, where the electrolyte is layered (thickens at the bottom, thinens at the top). This mode should be used once or at most twice a year.
If it is not a maintenance-free battery and therefore has freely accessible caps, it is necessary to leave these caps open during charging.
Additional information:
All types of 12V lead-acid batteries (wet, MF, Ca / Ca, AGM and GEL)
5 year warranty.
- 12V charger for car and motorcycle batteries, ATVs, water and snow scooters
- Comfort Connect (crocodile clips), M6 battery mount
- 8-step charging
- modes: for cold weather, AGM, reconditioning, battery activation, charging, maintenance mode, battery saving, electrolyte mixing
- temterature sensor
- Max. charging current 5A
- For batteries: 1.2 - 110Ah (maintenance mode for batteries up to 160Ah)
- Protection: IP65
- short circuit protection
- 5 year warranty
CTEK MXS 5.0
- Availability: 4
- Delivery Status: Depens on courier (Immediately at the store in Prague)
- 83.60 €
- Ex Tax: 69.09 €
Tags: CTEK MXS 5.0 charger, CT-101024,
Recommended Products